Product ID:6013 SMAW ELECTRODE,WELDING
MSDS Date:01/01/1985
FSC:3439
NIIN:00-155-6868
MSDS Number: BDCXX

AIRCO WELDING PRODUCTS

Emergency Phone: 201-464-8100

Cage: 83923

DIV OF THE BOC GROUP INC AIRCO INC

MURRAY HILL, NJ 07974 US

Telephone: 908-665-2400

Cage: 6S493

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 3-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

CELLULOSE (COVERING OR FLUX) TLV GIVEN FOR NUISANCE DUST

Fraction By Weight: 0-5%

ACGIH TLV: 10 MG/CUM

MANGANESE FUME,AS MN (COVERING OR FLUX)

Fraction By Weight: 1-4%

ACGIH TLV: 1 MG/CUM

IRON (AS OXIDE FUME)

RTECS: NO7525000

Fraction By Weight: 0-1%

ACGIH TLV: 5 MG/CUM

AISI 1010 STEEL (CORE WIRE) TLV GIVEN FOR OXIDE FUME BY

Fraction By Weight: 82%

ACGIH TLV: 5 MG/CUM

Effects of Overexposure:SHORT TERM OVEREXPOSURE MAY RESULT IN
DIZZINESS,NAUSEA OR DRYNESS OR IRRIT OF NOSE, THROAT, OR EYES

First Aid:REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION.

Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLE PRODUCTS

Handling and Storage Precautions:A
Other Precautions:FOR ADDITIONAL INFO, SEE AMER. NATNL STD
249.1-1.1973,SAFETY IN WELDING & CUTTING & WELDING HDBK, VOL 1,
CHAP 9; BOTH AVAILABLE FROM; AMERICAN WELDING SOC; 2501 NW7TH.,
MIAMI, FLA 33125

Respiratory Protection:NIOSH/MSHA APPRVD AIR SUPPLIED FOR EXPOS OF
CONCERN IN CONFINED AREA
Ventilation:LOCAL: IN SEMI-OPEN AREA. MECHAN:TO KEEP EXPOSURE BELOW TLV
Protective Gloves:WELDERS PROTECT
Eye Protection:HELMET, LENS SHADE 10 OR
Other Protective Equipment:APRON, LEGGINGS, BOOTE, CAPE, SHOULDER
COVERS; SEE SUPP DAT
Supplemental Safety and Health
ADD PROTECTIVE EQUIPMENT:HARD HATS, SCREENS, LOW REFLECTIVITY WALLS OR
BOOTH WELD IN WELL VENTILATED AREA. AVOID INHAL OF WELD FUMES.
STOCK NOS:11318-2981:2982:2983;2984;2985;2986;3457;3458

HCC:D1

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:FUMES & OXIDES OF CONSTITUENT METALS;
SOME CO, NO*2 & OZONE

Waste Disposal Methods:CONSULT MFGR FOR DETAILED METHODS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.